供需大廳
Access
登錄/注冊
供應商登錄
榮格工業資源APP
了解工業圈，從榮格工業資源APP開始。
Description
https://www.laser-crylink.com/laser-products/laser-crystal/tmylf/
Two-micron Tm3+ lasers are of interest for many applications in the scientific, defence, and medical fields. Thulium readily substitutes into many crystal hosts that are suitable for high-average-power laser systems and it has an absorption band at ~0.8 μm allowing excitation with commercially available high power laser diodes. Thulium doped yttrium fluoride lithium crystals have low nonlinear refractive index and thermo optic constant , which are very suitable for the application in the fields of scientific research, production, education and other optoelectronic fields. The crystal is a negative uniaxial crystal with a negative refractive index temperature coefficient, which can offset some thermal distortion and thus has high beam quality output. The pump wavelength is 792 nm, and the linear polarized laser with wavelength of 1.9 mm outputs at in the direction of a axis. outputting light from c axis is non-linear polarized. High power laser output can be obtained by selecting proper crystal size and doping concentration.
Parameter
| Concentration Tolerance (atm%) | 2-4 at.% |
| Lattice Constants | 4~5 |
| Orientation | a-cut, other orientations also available |
| Parallelism | <10” |
| Perpendicularity | <5” |
| Surface Quality | 10-5 scratch & dig |
| Wavefront Distortion | λ/8 @ 633nm |
| Surface Flatness | λ/10 @ 633nm |
| Clear Aperture | 95% |
| Length Tolerance | ±0.1 mm |
| Face Dimensions Tolerance | +0/-0,1 mm |
| Protective Chamfers | <0,1 mm at 45? |
| Damage Threshold | over 15J/cm2 TEM00, 10ns, 10Hz |
Physical and Chemical Properties
| Crystal Structure | Tetragonal |
| Lattice Constants | a=5.16?; c=10.85? |
| Density | 3.99 g/cm3 |
| Melting Point | 819℃ |
| Thermal Conductivity | 6 Wm-1K-1 |
| Thermal Optical Coefficient(dn/dT) | π = 4.3 x 10-6 x °K-1; σ = 2.0 x 10-6 x °K-1 |
| Thermal Expansion /（10-6·K-1@25°C ） | 10.1×10-6 (//c) K-1, 14.3×10-6((//a) K-1 |
| Hardness (Mohs) | 5 |
| Shear Modulus /Gpa | 85 |
| Specific Heat | 0.79 J/gK |
| Poisson Ratio | 0.3 |
Optical and Spectral Properties
| Laser Transition | 3F4→3H6 |
| Laser Wavelength | π:1880 nm; σ:1908 nm |
| Absorption Cross-section at Peak | 0.55×10-20 cm2 |
| Absorption Bandwidth at Peak Wavelength | 16 nm |
| Absorption Peak Wavelength | 792 nm |
| Lifetime of 3F4 Thulium Energy Level | 16 ms |
| Quantum Efficiency | 2 |
| Non-linear Index n2 | 0.6 x 10-13 |
| Optical Quality | < 0.3 x 10-5 |
| Refractive Index @1064 nm | no=1.448, ne=1.470 |
| Laser Induced Damage Threshold | >10 J/cm2@1900 nm, 10 ns |
| Coatings | R<0,5% @792 nm + R<0,15% @1800-1960 nm on both sides; custom coatings also available |
Absorption and Emission Spectrum
Feature
-
Low nonlinear refractive index
-
Low thermo-optical constant
-
Low polarization loss
-
Long upper energy level fluorescence lifetime
-
Small up-conversion effect
-
No absorption loss of sensitized ions
Application
-
Medical diagnosis and treatment
-
Laser radar
-
Laser ranging
-
Electro-optical countermeasure
-
Laser remote sensing
-
Laser imaging
-
Optical signal processing
-
Material processing